Fast Press button - Status LED on while button held, release button and reboots sensor and causes sensor to immediately connect to gateway.
Status LED - Goes on solid for 1 second at boot time indicating Power On Self Test (or POST) passed
Status LED - blinks rapidly for 5 seconds if after first boot up the sensor has talked to a gateway
Long Press Button - Press button for 5+ seconds until you see a slow flashing LED. This forces reboot and erase of sensors data logging memory. Status LED will flash slowly until FLASH erase is complete. If sensor has been on a shelf without a gateway nearby for any length of time it will, by design store readings in memory. If you do not want to want these readings or do not want to wait for them to be uploaded use this feature to erase the memory.
Status LED - Goes on solid for 1 second at boot time indicating Power On Self Test (or POST) passed
Status LED - blinks rapidly for 5 seconds if after first boot up the sensor has talked to a gateway
Long Press Button - Press button for 5+ seconds until you see a slow flashing LED. This forces reboot and erase of sensors data logging memory. Status LED will flash slowly until FLASH erase is complete. If sensor has been on a shelf without a gateway nearby for any length of time it will, by design store readings in memory. If you do not want to want these readings or do not want to wait for them to be uploaded use this feature to erase the memory.
0