S-60 Wireless AC Energy Meter

Single Phase Wireless AC Energy Meter, 80-260 VAC input, includes 80 Amp Split Core CT, 45-65 Hz, Class 1.0 +/- 1%
$159.95

Single Phase Wireless AC Energy Meter, 80-260 VAC input, includes 80 Amp Split Core CT, 45-65 Hz, Class 1.0 +/- 1%

Whether you are a building scientist researching the impact of energy saving building materials and construction techniques or an energy consultant helping your clients reduce their energy consumption, if you care about energy consumption and want to know where the power is going in your building our S-60 Wireless AC Energy Meter is the solution.  The S-60 AC energy meter monitors energy consumption on 1 phase and has the following features:

  • Compact and wireless makes for an easy installation.  The meter can often be mounted directly inside the breaker panel.  Connect AC power, clamp the current transformer around the wire coming from the circuit breaker you want to monitor, then log into our web site and view your data.
  • The following parameters are measured:
    • Active Energy in units of Watt Hours (Wh) - the total accumulated real energy consumed
    • AC Volts in units of Root Mean Squared Volts (VRMS) - the RMS voltage at the instant the meter generated the current reading.
    • Amperes in units of Root Mean Squared Amperes (IRMS) - The RMS current at the instant the meter generated the current reading
    • Power in units of Watts (W)
  • Compatible with any 0.0-0.333 Vrms output current transformer with easy CT amperage configuration on our web site.  No complicated menus to navigate on a tiny LCD screen when setting up our meter.
  • North America - CAT III; for distribution systems up to 260 VAC L-N
  • CE - CAT III; for distribution systems up to 260 VAC L-N

Comes with:

  • 80 Amp Split Core Current Transformer (CT) CT-80.1.0

Requires:

  • AC power hookup wire
  • The AC power connections are exposed therefor when not mounting inside the breaker panel a suitable NEMA enclosure is required
Documentation
User Manual

 

 

Customers who bought this item also bought

Battery, Lithium 3.6 Volt ER14505

Long life Lithium Thionyl Chloride Battery, AA Size, ER14505. Most of our sensors use this battery. Use caution in buying these from local suppliers as they do not sell very many and their inventory may be old. While this battery has a very long (15-20 year) shelf life the issue is that it "hibernates" if it is not in use. Once it hibernates you have to wake it up before it can deliver sufficient current to properly power our sensors. To wake the battery up connect it to an ammeter and draw at least 100 mA, or in a pinch you can insert it into our sensor reverse polarity (aka backwards) for 10 seconds which forces the high current draw needed to wake the battery. We use a lot of these batteries so our stock is always fresh.
From $4.99

A-1-40 HumiSense Temperature and Humidity Probe, 4 centimeter probe, no cable

A-1 HumiSense Temperature and Humidity Probe compatible with OmniSense S-2 sensors. Miniature 3/16" (5mm) diameter probe cabled to a 3.5mm TRRS audio plug, ±0.3°C/±2.0%RH
From $29.95

Mounting Screws for S-1 , S-10, S-11, S-16 and S-160 sensors

#12 x 2" 18-8 stainless steel mounting screws for S-1, S-10, S-11, S-16 and S-160 sensors includes screws and 18-8 stainless split washers. One pack includes 2 screws and 2 washers.
From $0.85