S-31 Wireless Temperature, Humidity and Smoke Monitor
OmniSense S-31 Temperature, Humidity and Smoke Monitor is ideally suited to continuous real time monitoring for smoke in HVAC ductwork and includes a NC/NO dry contact relay that is activated when smoke is detected.
-
*
-
Temperature, Humidity and Smoke Monitor is ideally suited to continuous real time monitoring for smoke in HVAC ductwork and includes a NC/NO dry contact relay that is activated when smoke is detected. As with all our sensors, data is relayed by our gateway over the internet in real time and can be viewed from any web browser.
- NC/NO dry contact relay activated when smoke is detected. A wireless connection is NOT required for smoke to be detected or for the relay to activate.
- Operating conditions - -10°C to 55°C, 15% to 90% RH, non condensing
- Over The Air updates of
- Firmware
- Configuration, including sample period (ie time between samples)
- Powered from 2 x AA Alkaline batteries
- data can be graphed against data from any other OmniSense sensor or sensor(s)
- alarm emails are automtically sent when the smoke alarm goes off
- FCC/CE approved
- Rugged 6x6x4 PVC JBOX enclosure
Requires:
- OmniSense Gateway
- OmniSense Monitoring Account
Documentation
| S-31 Quick Start Guide |
 |
